1 / 8 Custom cut coir mat installed flush in a recessed restaurant entrance
Hover to zoom · click for full screen Hover to zoom Tap to zoomCustom Cut Coir Mats — Made to Your Size
Custom Cut Coir Mats — Made to Your Size
Manufacturer-direct · cut to your dimensions
Ships from Pennsylvania within 1 business day
CUSTOM SIZE · CUT TO ORDER
Couldn't load pickup availability
- Ships Within 1 Business Day
- Quality Guaranteed
- 30 Day Returns
Ordering for a business, property or job site? Request a bulk quote
A coir mat cut to your exact length and width, for recessed mat wells, double doors and entries no stock size fits. Enter your length, width and thickness, and the price updates before you add to cart.
- Any size up to 6 ft x 44 ft: Cut to your measurements, up to 6 ft deep and 44 ft wide (33 ft in 1 1/4"), in half-inch steps.
- Five thicknesses: 1/2", 5/8", 3/4", 1" and 1 1/4". The thinner cuts clear surface-mounted doors; the thicker ones fill deep recessed wells.
- Priced by the square foot: Natural coir starts at $10.00 per sq ft at 1/2" and runs to $14.00 at 1 1/4". Your price shows before checkout.
- Non-slip vinyl back: Holds the mat flat on tile, wood and concrete and keeps grit and moisture off the floor underneath.
- Plain coir: Natural color, or chocolate or black in 5/8". Not a printed or personalized mat.
Where it works best
Length is the depth of the mat, front to back as you walk across it. Width is side to side, usually the longer side across the doorway. For a recessed well, measure the opening in several places, use the smallest length and width, and take off about 1/4" each way so the mat drops in and lifts out easily. Need help? Contact us and we will size it with you.
Care
Shake it out, sweep it or vacuum it. If it gets soaked, stand it on edge to dry before you put it back down. A new coir mat drops loose fibers for the first few weeks; a few good shake-outs and it settles.
Specs
- Face: Natural coir; chocolate or black in 5/8"
- Backing: Non-slip vinyl
- Thickness: 1/2", 5/8", 3/4", 1" or 1 1/4"
- Sizes: Any length to 6 ft and width to 44 ft (33 ft in 1 1/4"), in 1/2" steps
Share
Five minutes with a tape measure
How to Measure for a Custom Mat
Surface-mounted mats (sitting on the floor)
Width: measure the door opening and add 2–6″ on each side so the mat frames the doorway.
Length: 24″ minimum; 30–36″ if people walk through without pausing.
Door clearance: if the door swings over the mat, measure the gap under the fully open door and choose a thickness comfortably below it.
Step by step, with worked examples: how to measure for a custom mat.
Recessed entries and mat wells
Measure the opening itself, not the old mat — old mats shrink and curl.
- Take the width at three points and the length at both ends; wells are often slightly out of square. Use the smallest of each.
- Order about 1/4″ less than the smallest measurement in each direction so the mat drops in and lifts out for cleaning.
- Match thickness to the pit depth; between sizes, round up — coir compresses slightly underfoot, so standing a touch proud beats starting below the floor line.
How pricing works
Pricing is computed on your exact dimensions: area in square feet times the per-square-foot rate for your chosen thickness, rounded to the cent. The price above updates live as you select your size — no quotes, no phone calls.
Made for the Entrances Stock Mats Can't Fit
-
Recessed & Sunken Entries
Recessed entry guideCut to your mat well’s exact opening so the fit looks built-in. Five thicknesses from 1/2″ to 1 1/4″ — including the heavy gauge older recessed pits need — so the mat sits flush with the surrounding floor.
-
Double Doors & Oversized Entrances
Double-door sizing guideOne continuous mat up to 44 ft wide (33 ft in 1 1/4″) instead of two stock mats drifting apart. French doors, patio sliders, grand entries, and porch runs — covered edge to edge with a single clean piece.
-
Commercial Entrances
Commercial matting guideLobbies, storefronts, and building entrances: stiff natural-fiber scraping in thicknesses for busy entrances, sized to span the full opening. For corridors and very large installs, see our coir matting rolls.
Custom Cut Mat FAQ
What sizes can you cut?
Anything from 1 ft × 1 ft up to 6 ft deep × 44 ft wide (33 ft in 1 1/4″), in half-inch increments.
When will my mat ship?
Custom mats are cut to order after you place your order and ship within 1 business day. Contact us before ordering if timing is critical.
Can I return a custom cut mat?
Custom cut mats may be returned within 30 days under our custom-order return policy; a 15% restocking fee may apply. Double-check your measurements with the guide above, or contact us before ordering and we’ll check them with you.
My mat well is out of square — what do I do?
Measure width and length in several places, use the smallest measurement in each direction, and order about 1/4″ under that. The dense coir edge hides minor irregularities. For openings badly out of square, contact us first.
What backing do custom mats have?
A non-slip vinyl backing that keeps the mat in place and protects the floor beneath. Coir does best covered or semi-covered; for fully exposed spots, pair a rubber scraper mat outside with coir just inside the door.
Will a long mat ship rolled?
Yes — coir mats ship rolled. Unroll the mat and let it relax; it settles flat within its first day or two in place.
- 5 stars: 1 (100%)
- 4 stars: 0 (0%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
Perfect! Exactly what we needed. Thrilled with the quality & fast shipping. Looks amazing!